The natural, durable and attractive bamboo is not only the mats, baskets and other artisans, but also for the packaging of high quality decorative panels, curtains and blinds. Window blinds bamboo, in fact, not only a classic in the interior of the rooms, but keep cool. Bamboo handicrafts, on the basis of their specific Webtechniken. These sites can be considered as weaving techniques of the aircraft, weaving and weaving mixed dimensions. First, with a bamboo Crafter need to know, and the plane for the technique of weaving bamboo crafts.
Plane weaving bamboo or plane generates two products as weaving mats or carpets. It differs from the method, with the three-dimensional products such as baskets, lamps, people, etc. Before weaving, the stalks of bamboo are as follows for you to weaving.
The treatment of bamboo for weaving
Green skin of the bamboo rod is scraping the surface of green
with a blade. Force is equal to the surface of the foot, to make uniform color bamboo.
The top of the rod is flattened to stripping. A knife used for the same board.
The foot is divided into slices of equal width. The number of bands depending on the diameter of the stem. Take care to cut the edge down along the length of the stem. The discs are completely separate for the different pieces.
Disks are striped in thin layers. The knife comes with the blade against the top horizontal 1 / 3 of the Streif Chen. Nipping first cut by the blade in the group. Then the blade is 0.5 to 1 mm of the first layer. After repetition of the process necessary for a number of times, the layers are deducted. The thickness of the layers depends on the need for the project of woven products. Layers are separated into thin slices, using the hands. The bands are or decrease the brightness of the color by another. They accordingly.
The bamboo strips are then colored and bleached by using different materials such as dyes, sulfur, hydrogen peroxide or other chemicals. Soaking, cooking, washing, drying and air are available to support.
Plane weaving bamboo
Before us on the process of weaving bamboo plane, there are two basic terminology, which should include the student’s bamboo Weber. These two concepts – warp and weft. Warp is the amount of parallel strips of bamboo, which are the foundation on which the aircraft is weaving. You are in the direction of the length of the work plan or work. Hot bamboo strip, inserted widthwise under and above the fault, for a design.
The basic technique for weaving bamboo aircraft that weaving points http://www.blogger.com/img/blank.gifs samples. It is the combination of two different colors of light a bamboo and other dark along the chain and frame of the strip of bamboo. The intensity of color and contrast in the models are created using the density of points from tissues and the fault.
There are many other traditional methods of weaving bamboo, which is also interesting to know.
